Read on if you want to learn how to copy Windows to a different hard disc. Hardware in computers eventually fails because of normal wear and tear. Hard drives naturally suffer from this same problem and eventually need to be replaced because of a decline in performance.
Can You Move Windows from One Drive to Another?
Yes, you can move Windows from one drive to another, and there are several methods to accomplish this. One common approach is to clone your existing drive to the new drive, but there are alternative methods as well.
Instructions for Moving Windows to a New Disk (Windows 11/10/8.1).
Method-1 involves using the built-in Windows Backup and Restore tool to build a System Image and then restoring that image to the new drive; Method-2 involves using a third-party disc cloning application to clone your Windows disc to a new one (Method-2). In the next sections, we will examine both approaches.
Read Also:
- GeForce Experience Error Code 0x0003
- WiFi Doesnt Have a Valid IP Configuration
- How To Find the Path of a Network Drive Windows 10
Method 1: How to Create a System Image and Move Windows to a Different Drive.
When moving Windows, files, applications, and settings to a new drive that is the same size or greater than the old one, the first and most highly recommended option is to use the built-in Windows system image tool.
For the Windows System Image to be usable, the replacement drive must be either larger than the existing drive (in this case, 256GB) or the same size (256GB).
1: Make a Full Backup of Your Computer System.
If you want to make a complete copy of your Windows hard drive, you need use the “System Image” backup method, which entails:
Step 1: Obtain a USB hard drive with sufficient storage space and connect it to the computer. When finished, check that Windows Explorer can see it.
Step 2: Select Open Control Panel from the Start menu.
Step 3: Click on the Backup and Restore button (Windows 7)
Step 4: System Image Creation by Clicking the corresponding button
Step 5: A window will pop up when your computer looks for external storage devices. To select a different option, use the menu provided. When prompted, select “On a hard disc” and then locate the external hard drive connected via USB.
Step 6: The whole amount of information that will be copied to the external USB hard drive will be displayed in a new window. Pick Begin Backup to get going.
Step 7: The time remaining in the procedure will be displayed in the form of a progress bar. Wait patiently as Windows creates an image of the system and stores it on the external drive. (The time it takes will be determined by the quantity of data and the processing power of the hardware).
Step 8: Following the successful completion of the system image, you will be invited to make a system repair disc. If you don’t want to continue, just click the “No” button.
2: Delete everything on your hard drive and start over.
Follow these steps to restore Windows to the new disc once you have created a system image backup and obtained the Windows installation media via USB:
Step 1: Your computer needs to be turned off.
Step 2: To prevent any blunders, take off the present Windows hard disc and unplug any additional discs.
Step 3: Put in the new disc drive.
Step 4: To access the System Image, insert the external USB disc.
3: System Image Restoration is the procedure to follow.
Step 1: Boot your computer from the Windows USB installation disc. (Del, F9, and F12 are often used to obtain boot order choices.)
Step 2: Once you reach the Windows Setup page, select Next and then click Repair your computer.
Step 3: Then, go to System Image Recovery after clicking Troubleshoot.
Step 4: Keep “Use the latest available system image” selected and press Next when the System Recovery tool recognises the image you just prepared.
Step 5: If you want to format and re-partition the disc, check the box and move on to the next step.
Step 6: When you’re ready to proceed with system image restoration, click Finish and then choose Yes. Depending on how much information is stored in the system image, this could take a few minutes.
Step 7: The PC will resume in 60 seconds when the restoration is finished. Now that the new drive has been installed, you can take out the USB installation stick. (You may need to use the BIOS/UEFI setup utility to tell the machine to use the new hard drive.)
Method 2: Tutorial on Cloning a Hard Drive to Transfer Windows to Another Computer.
The second option is to use a third-party Disk Cloning Software/Utility to clone your primary disc to a new disc. One of the following trustworthy, no-cost Disk Cloning Tools will do the trick for this job:
Step 1: Select the disc that contains the operating system (the Source disc) and continue.
Step 2: Now we must verify the new hard drive, or the Target disc. To continue, please select the Next button.
Step 3: Choose to Go Forward.
Step 4: You will now be warned that the whole contents of the specified drive will be deleted. If you want to continue cloning the drive, click the Continue button.
Step 5: Once the cloning process begins, you can watch everything unfold on the screen. (Wait for it to finish up.)
Step 6: When the cloning is done.
Step 7: Power down the computer.
Step 8: Take off the old hard disc and swap it out for the cloned one.
Step 9: Let Windows load after you’ve turned on your computer. If successful, the computer will continue to boot into the Windows desktop as it did before the drive was replaced.
Cloning Your Windows Drive
Cloning your Windows drive is one of the most straightforward methods to move Windows to another drive, especially when upgrading to an SSD. Here’s a step-by-step guide:
- Backup Your Data: Before starting, ensure you have a backup of all your important data, as the cloning process will erase the target drive.
- Choose a Cloning Tool: Select a reliable cloning tool like Macrium Reflect, EaseUS Todo Backup, or Clonezilla. Download and install the chosen software.
- Connect the New Drive: Physically connect the new drive to your computer, either internally or using an external enclosure.
- Open the Cloning Software:
- Launch the cloning software you installed earlier.
- Select the Source and Target Drives:
- Choose your current Windows drive (the source drive) and the new drive (the target drive) where you want to move Windows.
- Start the Cloning Process:
- Follow the on-screen instructions to initiate the cloning process.
- The software will copy all data from the source drive to the target drive, including the Windows operating system.
- Complete the Cloning:
- Once the cloning process is complete, shut down your computer.
- Disconnect Old Drive:
- Disconnect the old drive (the source drive) from your computer.
- Boot from the New Drive:
- Restart your computer and boot from the new drive to ensure Windows is working correctly.
Fresh Installation of Windows
Alternatively, you can perform a fresh installation of Windows on the new drive:
- Create a Bootable USB:
- Create a bootable USB drive with a Windows installation using the Media Creation Tool from Microsoft’s official website.
- Connect the New Drive:
- Connect the new drive to your computer.
- Boot from USB:
- Restart your computer and boot from the bootable USB drive.
- Install Windows:
- Follow the on-screen instructions to install Windows on the new drive.
- Complete Setup:
- After Windows installation is complete, follow the setup prompts, and create a user account.
- Install Drivers and Software:
- Install necessary drivers and software on the new Windows installation.
- Data Migration:
- Transfer your personal files and data from the old drive to the new one.
Frequently Asked Questions
- Can I Move Windows from HDD to SSD?
- Yes, you can move Windows from an HDD (Hard Disk Drive) to an SSD (Solid-State Drive) using the methods described above.
- Can You Move Windows to Another Drive Without Cloning?
- Yes, you can perform a fresh installation of Windows on the new drive without cloning, as explained in Method 2.
- Can I Install 2 Windows on One Drive?
- While it’s possible to install multiple versions of Windows on a single drive, it’s generally not recommended, as it can lead to conflicts and issues. It’s better to have a separate drive for each Windows installation.
Read Also:
In conclusion
Moving Windows to another drive is achievable using methods like drive cloning or a fresh Windows installation. The method you choose depends on your preferences and requirements.
Ensure you have adequate backups and follow the steps carefully to successfully migrate your Windows operating system to a new drive.
