We occasionally see the Bad System Config Info problem in Windows 10, which is inconvenient. This issue could be caused by incorrect System Settings Software or, in some cases, malfunctioning hardware.
The entire screen of your PC turns blue during the error, which is also known as Blue Screen Of Death.
How To Repair Corrupted System Configuration Information In Windows 10
Bad System Config Info, often known as a stop error, is one of the most critical issues that Windows users confront.
Continue reading if you are experiencing the same issue and wish to find a solution. We’ll go over different options for getting rid of the BAD SYSTEM CONFIG INFO problem.
1. Automated Repair
The first technique requires you to perform an automatic Windows repair. Many Windows 10 users have claimed that the process of automated Windows repair fixed their troubles in cases when the error was caused by incompatible and corrupted system files.
To complete the procedure, you’ll need a Windows 10 CD. But if you don’t have a Windows 10 CD, don’t worry; you can create a bootable DVD/USB by yourself by following the procedures below.
Please keep in mind that “If your DVD that you manufactured yourself using these methods fails to work in some circumstances, you can attempt another remedy that we have provided in this post.
You must use the DVD to complete the procedure because using a USB can cause problems. First and foremost, we recommend that you boot from a DVD “..
Step 1: First, turn off the computer and then insert bootable disc.
Step 2: After properly inserting the media, press the power button.
Step 3: When a display appears on your screen, press F1/F2 to enter BIOS, which is unique to your machine. Continue to hold down the key until the BIOS screen appears. When the BIOS screen appears, navigate to the BOOT option and enable the Launch CSM.
Step 4: Go to the Security tab and uncheck the box next to Secure Boot Control.
Step 5: Go to the Save and Exit tab and pick USB/DVD from the Boot Override section.
Step 6: Now you must start your computer using the bootable disc.
Step 7: Make a decision After that, you’ll be sent to the setup screen.
Step 8: Next, go to the bottom of Windows and click the option Repair your machine.
Step 9: Your computer will now begin to fix itself. If the Troubleshoot option appears, choose it, then Advanced, then Startup Repair.
Check if the problem has gone away once you’ve completed the process and rebooted your computer. If you answered yes, you have completed the task; however, if you did not, proceed to the next step in our post and try another way.
Read Also:
2. Replacement of Old Registry Files
You will need to change old registry files from your machine to complete this procedure. Before you begin, keep in mind that you will be dual booting your PC with another operating system if you follow the steps.
You will utterly sabotage your dual boot if you use Bootrec. As previously stated, utilising USB to boot will result in problems. As a result, we propose that you use a DVD to complete the procedure.
To carry out this procedure, you will first need to run the bootrec command to resolve the problem. Because we already know that there is a boot issue, bootrec can help us solve it. Many users have stated that bootrec has fixed their problem.
To continue the procedure that is embedded inside the window, you can utilise the utility bootrec.exe. The main objective of using this utility is to rebuild the Boot Configuration Data (BCD).
To access the bootrec.exe programme, follow the instructions outlined below:
Step 1: Restart your device and boot it using a DVD or USB drive.
Step 2: If your keyboard prompts you for a key, press any button on your keyboard.
Step 3: Choose your time zone, currency, language, and keyboard, then press Next.
Step 4: Choose the OS you wish to repair and then click Next.
Step 5: In the System Recover Option, select the Command Prompt option.
Step 6: A dark screen with a blinking cursor will appear on your screen. You must now type the command “bootrec.exe” into the command prompt and then press the Enter key.
After rebuilding the BCD file, your device will return to its previous state. If your rebuilding BCD fails to function in some circumstances, you can try deleting the previous BCD and recreating it.
This will result in newly updated boot configuration data. To do so, follow the steps below, remembering to press the enter key after each one.
C:BCD Backup bcdedit /export
C:
boot from cd
bcd -s -h -r attrib
C:bootbcd bcd.old ren
Changing the Registry Files bootrec /Rebuildbcd
This option will be used only if the first one fails to resolve your problem. Because this is a technological procedure, you must exercise caution when implementing it. Now follow these to execute this solution:
Step 1: Follow the instruction offered on your computer screen in order to reach the Command Prompt by selecting the option TroubleShoot, then click on the Advanced option.
Step 2: From the drop-down menu, choose the Command prompt.
Step 3: Carefully type the following commands into the terminal without making any mistakes.
“cd X:WindowsSystem32config” “cd X:WindowsSystem32config” “cd X:WindowsSystem32config” “c
This command will open the configuration.
Step 4: Carefully type the commands listed below, one by one, without stopping.
ren X: System Configuration in Windows
DEFAULT DEFAULT DEFAULT DEFAULT DEFAULT DEFAUL
SAM.old ren X: WindowsSystemconfigSAM
WindowsSystemconfigSECURITY SECURITY.old ren X
ren X: Windows\System\config\SOFTWARE SOFTWARE.old
ren X: SYSTEM.old SYSTEM.old SYSTEM.old SYSTEM.old SYSTEM.old SYSTEM.old SYSTEM.old SYSTEM
The command above will rename all of your currently registered files. It’s now time to replace all of the original files with backups.
Step 5: To do so, type the commands listed below.
X:WindowsSystem32configRegBackDEFAULT X:WindowsSystem32configRegBackDEFAULT X:WindowsSystem32configRegBackDEFAULT X:WindowsSystem32configRegBackDEFAULT X:WindowsSystem32configRegBackDEFAULT X
X:WindowsSystem32configRegBackSAM X:WindowsSystem32configRegBackSAM
X: X: X: X: X: X:
X:WindowsSystem32configRegBackSECURITY WindowsSystem32configRegBackSECURITY
X:WindowsSystem32configRegBackSYSTEM X:WindowsSystem32configRegBackSYSTEM
X:WindowsSystem32configWindowsSystem32configRegBackSOFTWARE X:WindowsSystem32configWindowsSystem32configRegBackSOFTWARE X:WindowsSystem32configWindowsSystem32configRegBackSOFTWARE X:WindowsSystem32configWindowsSystem32configRegBackSOFTWARE X:WindowsSystem32configWindowsSystem32configRegBack
Close the command prompt and restart your device after you’ve entered all of the commands. It’s likely that you’ve already done it. If that doesn’t work, continue on to the next option.
3. Update Drivers
The problem could be caused by an old or incompatible driver on your device. Take, for example, how when a driver fails to work, it prevents you from using certain hardware or causes you to receive the dreaded BAD SYSTEM CONFIG INFO BSOD error.
We strongly advise you to update your drivers because outdated drivers are the most common cause of BSOD. Updating a driver is a simple procedure. To do so, go to your hardware manufacturer’s website, search for your device, and download the latest version of drivers.
Installing the most recent version of drivers will very certainly resolve your BSOD problem. Make sure to update as many drivers as possible to ensure that your BSOD issue is resolved. To fix the problem, you’ll need to update every single driver on your device.
If you’re doing it manually, you’ll need to be patient because it’s a lengthy procedure that can take a long time. You can use certain updater programmes to accomplish it mechanically and quickly for you.
This is the most efficient method of resolving the problem. If you’re still having problems, we offer a number of different options. Scroll down and give them a shot.
4. Use The bcdedit Command
BAD SYSTEM CONFIG INFO errors can also occur as a result of configuration changes. The BAD SYSTEM CONFIG INFO problem can be caused by your system being wrongly configured, or the number of processes and amount of memory included in the configuration file not matching the correct value.
To do so, follow the steps outlined below:
Step 1: First and foremost, you must initiate the Automatic Repair. To do so, restart your device while it is starting and continue the process until the Automatic Repair begins successfully.
Step 2: Select the Troubleshoot option, then the Advanced option, and finally the Command prompt option.
Step 3: When your command prompt appears, type the following commands.
bcdedit/deletevalue
numproc numproc numproc numproc numproc numproc numproc
bcdedit/deletevalue
truncatememory truncatememory truncatememory truncatememory
Step 4: Finally, exit the command prompt and reboot Windows 10.
5. Fix The BCD File
Your BCD file may get corrupted or damaged for a variety of reasons, which may be the cause of
BAD SYSTEM CONFIG INFO error. You will need a DVD or a bootable USB to complete this solution. You can build your own DVD or USB if you don’t have one, like we said above.
Follow these methods to fix the BCD file:
Step 1: To begin, plug a DVD or USB drive into your device and boot from it.
Step 2: It will begin the installation of Windows 10. After clicking Next, select the option Repair your machine.
Step 3: Select Troubleshoot from the drop-down menu, then Advanced, and finally Command Prompt.
Step 4: After your command prompt has started, type the following commands, making sure to press Enter after each one.
/repairbcd bootrec
/osscan bootrec
/repairmbr bootrec
You should take caution while using the command because the last one will erase and recreate the master boot records. Closes the command and, if necessary, restarts your device to eliminate the error.
6. Reset Windows 10
You must now restore the system to its previous state. Follow the steps outlined below to do so:
Step 1: To begin the Automatic Repair Process, start your computer by restarting it twice.
Step 2: Select Troubleshoot from the drop-down menu, then Advanced, and finally Command Prompt.
Step 3: Now you must choose your username and follow the computer’s instructions on your screen.
Step 4: Choose the restoration point you want to restore.
Step 5: Be patient and wait for the system restore process to complete.
7. Windows 10 Reset
If the system restore fails to resolve the error of Bad System Config Info, you can try resetting Windows 10. First and foremost, make a backup before performing a Windows 10 reset, as this will permanently destroy all of your stuff.
Follow the steps outlined below to continue the reset procedure:
Step 1: To begin the Automatic Repair Process, start your computer by restarting it twice.
Step 2: Select Troubleshoot from the drop-down menu, then Reset This Computer.
Step 3: Finally, pick a choice. Take everything out. Then select “Only the drive where Windows is installed” from the drop-down menu. Finally, select “delete my files.”
Step 4: Press the reset button, be patient, and wait for the procedure to complete.
It’s possible that you’ll need Windows 10 installation media to finish the process of resetting Windows 10. That is why you must have at least one of them. You now have an updated version of Windows 10 after completing this process.
8. Hardware Update
Step 1: First and foremost, make sure your RAM is in good working order, as most errors are caused by malfunctioning RAM.
Step 2: Use the Windows Memory Diagnostic Tool to check for damaged RAM. It will check your RAM by reading it. The tool’s launch is far too straightforward.
Step 3: To open the Run window, simply press Windows + R on your keyboard. Press the Enter key after typing mdsched.exe.
Step 4: Finally, reboot your computer. It will take a few moments to finish, and then the device will resume automatically.
If your hardware is malfunctioning, you can replace it to resolve the problem.
Read Also:
Conclusion
All of the approaches listed above are quite effective in resolving the Bad System Config Info problem. You can select any of them based on your device’s preferences, and you can also attempt another approach if the first one fails to resolve your issue. Best of luck!
